-
Prince Hydraulic PTO Tractor Pump — 40 GPM, Model# HC-P-K11
At 1,000 PSI, direct drive hydraulic pump delivers 40.1 GPM at 1,000 RPM and over 20 GPM at 540 RPM. Pump has roller bearing construction, pressure balanced self-adjusting wear plates and an internally splined drive shaft, 1 3/8in.-21 tooth, so it needs no gear box. Handles pressures up to 2,250 PSI. SAE O-ring ports: inlet #20 1 5/8in.-12, drain outlet #16 15/16in.-12, plus auxiliary outlet, #12 11/16in.-12. Includes #20 SAE to 2in. hose adapter and #16 SAE to 1in. female pipe. Easy installation using torque arm restraint. Reservoir size should at least be as large as the output of the pump.
₹56,939.27₹64,739.17Prince Hydraulic PTO Tractor Pump — 40 GPM, Model# HC-P-K11
₹56,939.27₹64,739.17 -
Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 48in. Stroke, 2in. Shaft
The Prince Tie-Rod Cylinder is made to handle the most demanding applications. With 70 plus years of American-made know-how they use a high-strength ductile iron piston, butt, gland, and clevis, plus urethane seals in a honed tube that allow them to handle 3,000 PSI continuous working pressure. Aircraft quality paint provides lasting performance. Seal kits are also available (sold separately.)
₹51,099.27₹58,099.17Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 48in. Stroke, 2in. Shaft
₹51,099.27₹58,099.17 -
Prince Hydraulic PTO Tractor Pump — 21 GPM, Model# HC-PTO-1A
Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
₹51,099.27₹58,099.17Prince Hydraulic PTO Tractor Pump — 21 GPM, Model# HC-PTO-1A
₹51,099.27₹58,099.17 -
Prince Hydraulic PTO Tractor Pump — 11.4 GPM, Model# HC-PTO-2A
Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
₹48,179.27₹54,779.17Prince Hydraulic PTO Tractor Pump — 11.4 GPM, Model# HC-PTO-2A
₹48,179.27₹54,779.17 -
Prince PTO Tractor Pump — 23 GPM, Model# HC-PTO-3A
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
₹48,179.27₹54,779.17Prince PTO Tractor Pump — 23 GPM, Model# HC-PTO-3A
₹48,179.27₹54,779.17 -
Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft
The Prince Tie-Rod Cylinder is made to handle the most demanding applications. With 70 plus years of American-made know-how they use a high-strength ductile iron piston, butt, gland, and clevis, plus urethane seals in a honed tube that allow them to handle 3,000 PSI continuous working pressure. Aircraft quality paint provides lasting performance. Seal kits are also available (sold separately.)
₹43,799.27₹49,799.17Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 36in. Stroke, 2in.Shaft
₹43,799.27₹49,799.17 -
Prince Welded Tee Cylinder — 2,500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2,500, bursting PSI is 5,000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. U.S.A.
₹43,799.27₹49,799.17Prince Welded Tee Cylinder — 2,500 PSI, 4in. Bore, 48in. Stroke, 2in. Shaft Size
₹43,799.27₹49,799.17 -
Prince Hydraulic Hand Pump — 3,000 PSI, Model# PM-HP-10B
Powerful! Operates a hydraulic press, dump, plow, snowblade, platform, frame straightener or similar equipment. 3 positions: 1) 1.25 cu. in. per stroke @1,500 PSI, 2) .95 cu. in per stroke @ 2,000 PSI, 3) .60 cu. in. per stroke @3,000 PSI. One gallon reservoir. Inlet check valve, release valve. Pressure port 3/8in. NPT. Applied handle force 60-65 lbs. Use on up to 200 cu. inch, single- or double-acting cylinder. 16 1/2in.L.
₹42,339.27₹48,139.17Prince Hydraulic Hand Pump — 3,000 PSI, Model# PM-HP-10B
₹42,339.27₹48,139.17 -
Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 30in. Stroke, 2in. Shaft
The Prince Tie-Rod Cylinder is made to handle the most demanding applications. With 70 plus years of American-made know-how they use a high-strength ductile iron piston, butt, gland, and clevis, plus urethane seals in a honed tube that allow them to handle 3,000 PSI continuous working pressure. Aircraft quality paint provides lasting performance. Seal kits are also available (sold separately.)
₹39,419.27₹44,819.17Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 30in. Stroke, 2in. Shaft
₹39,419.27₹44,819.17 -
Prince Welded Tee Cylinder — 2,500 PSI, 4in. Bore, 36in. Stroke, 2in. Shaft, Model# PMC-5636
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2,500, bursting PSI is 5,000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. U.S.A.
₹38,689.27₹43,989.17 -
Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft
The Prince Tie-Rod Cylinder is a heavy-duty double-acting tie-rod cylinder rated for 3,000 PSI continuous working pressure to handle demanding applications. Features high-strength ductile iron piston, butt, gland, and clevis, plus urethane seals in a honed tube for dependable performance. Aircraft-quality paint offers exceptional durability. Has high-quality urethane seals and SAE O-ring boss style ports. Includes Clevis and cotter pins for easy installation.
₹35,769.27₹40,669.17Prince Tie-Rod Cylinder — 3,000 PSI, 5in. Bore, 24in. Stroke, 2in. Shaft
₹35,769.27₹40,669.17 -
Prince Welded Tee Cylinder — 2,500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2,500, bursting PSI is 5,000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. U.S.A.
₹35,769.27₹40,669.17