-
Concentric High Pressure Hydraulic Gear Pump — 0.388 Cu. In., Model# G1224C5A300N00
Use this Concentric High Pressure Hydraulic Gear Pump on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy-duty cast iron pump turns at 4,000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient.
₹12,409.27₹14,109.17 -
Prince Hydraulic PTO Tractor Pump — 11.4 GPM, Model# HC-PTO-2A
Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
₹48,179.27₹54,779.17Prince Hydraulic PTO Tractor Pump — 11.4 GPM, Model# HC-PTO-2A
₹48,179.27₹54,779.17 -
Concentric Hydraulic Pump — 13.6 GPM, 2-Stage, Model# 1001506
The Concentric 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient.
₹12,409.27₹14,109.17Concentric Hydraulic Pump — 13.6 GPM, 2-Stage, Model# 1001506
₹12,409.27₹14,109.17 -
Concentric Hydraulic Pump — 28 GPM, 2-Stage, Model# 1080036
The Concentric 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient.
₹28,469.27₹32,369.17Concentric Hydraulic Pump — 28 GPM, 2-Stage, Model# 1080036
₹28,469.27₹32,369.17 -
Concentric Hydraulic Pump — 22 GPM, 2-Stage, Model# 1080035
The Concentric 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient.
₹24,089.27₹27,389.17Concentric Hydraulic Pump — 22 GPM, 2-Stage, Model# 1080035
₹24,089.27₹27,389.17 -
Concentric Hydraulic Pump — 16 GPM, 2-Stage, Model# 1001507
The Concentric pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient.
₹13,869.27₹15,769.17Concentric Hydraulic Pump — 16 GPM, 2-Stage, Model# 1001507
₹13,869.27₹15,769.17 -
Concentric Hydraulic Pump — 11 GPM, 2-Stage, Model# 1001689
The Concentric 2-stage hydraulic pump can give you faster cycle times and higher possible pressure with a small engine. With superior volumetric and mechanical efficiency, it is excellent for use on log splitters. It operates in a clockwise rotation at 85% efficiency.
₹10,949.27₹12,449.17Concentric Hydraulic Pump — 11 GPM, 2-Stage, Model# 1001689
₹10,949.27₹12,449.17 -
Concentric High Pressure Hydraulic Gear Pump — 0.129 Cu. In., Model# G1208C5A300N00
Use this Concentric High Pressure Hydraulic Gear Pump on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4,000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 90% efficient.
₹10,949.27₹12,449.17 -
Concentric Hydraulic Birotational Gear Motor — 4,000 PSI, 4,000 Max. RPMs, Model# WM09A1C080B-03BA107N
The Concentric Hydraulic Birotational Gear Motor is a pressure-balanced low torque motor that runs in either direction (CW or CCW). Delivers high performance throughout the entire speed and pressure range. 4,000 max. continuous PSI. Note: SAE #4 drain port (located on back of pump) MUST be used in Bi-Directional Applications. Failure to do so will damage the motor.
₹27,374.27₹31,124.17 -
Concentric High Performance Gear Pump — .976 Cu. In., Model# WP09A1B160R03BA102N
This Concentric High Performance Gear Pump is a compact, high-performance package that is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 92% efficiency, 3/4in. keyed shaft.
₹15,694.27₹17,844.17Concentric High Performance Gear Pump — .976 Cu. In., Model# WP09A1B160R03BA102N
₹15,694.27₹17,844.17 -
Concentric High Performance Gear Pump — 1.159 Cu. In., Model# WP09A1B190R03BA103N
This Concentric High Performance Gear Pump is a compact, high-performance package that is constructed of high-strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE A 2-bolt mounts and SAE O-ring side ports. W900 Series: 92% efficiency, 3/4in. keyed shaft.
₹16,424.27₹18,674.17Concentric High Performance Gear Pump — 1.159 Cu. In., Model# WP09A1B190R03BA103N
₹16,424.27₹18,674.17 -
Concentric Hydraulic Birotational Gear Motor — 4,000 PSI, 3,600 Max. RPMs, Model# WM09A1C111B-038A107N
The Concentric Hydraulic Birotational Gear Motor is a pressure-balanced low torque motor that runs in either direction (CW or CCW). Delivers high performance throughout the entire speed and pressure range. 4,000 max. continuous PSI. Note: SAE #4 drain port (located on back of pump) MUST be used in Bi-Directional Applications. Failure to do so will damage the motor.
₹29,564.27₹33,614.17